Filter
Top Products
A range of Miele cleaning and
conditioning agents is available from
the Miele UK Spare Parts Department
or via the internet at
www.miele-shop.com.
Do not use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents. Some scouring
agents claim to be non-abrasive.
These are also unsuitable as they
can cause matt areas to appear.
For stainless steel surfaces, use a
suitable stainless steel conditioning
agent.
Do not let water get into the
electronic unit or the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^
Switch the appliance off, switch off at
the socket and remove the plug.
^
Take any food out of the appliance
and store it in a cool place.
^
Take out any removable parts, e.g.
shelves, for cleaning.
^
The trays and containers in the door
can be removed from their stainless
steel frames for cleaning.
Cleaning the outer casing, the
interior and accessories
Use lukewarm water with a little
washing-up liquid. Accessories and
shelves should all be handwashed only.
^ Clean the appliance at least once a
month.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the outer casing,
interior and accessories with a damp
cloth and dry with a soft cloth. Leave
the doors open to air the appliance
for a short while.
^
Stainless steel surfaces can be
cleaned with a proprietary stainless
steel cleaning agent, following the
manufacturer's instructions on the
packaging.
^
After cleaning, stainless steel
surfaces should be treated with a
conditioning agent for stainless steel.
Cleaning and care
42