Miele KFN 14947 SDE ED Freezer User Manual


 
For the automatic ice cube maker to
operate it must be connected to the
mains water supply.
Switching on the ice cube
maker
^
Switch on the freezer section.
^
Open the top left drawer a little.
^ Press the On/Off button on the ice
cube maker. The indicator light will
come on.
^ Close the drawer.
The drawer must be completely shut
for ice cubes to be produced.
After the appliance is switched on for
the first time it can take up to 24 hours
for the first ice cubes to drop out of the
ice cube maker and collect in the
drawer.
Thereafter, when the ice cube maker is
switched off and then on again it will
take up to a maximum of 6 hours for ice
cubes to be produced.
To ensure that the water pipes are
thoroughly flushed through before
use, ice cubes from the first three
ice cube making processes must
not be consumed.
This applies not only to when the
appliance is installed for the first
time but also if the appliance has
been out of use for a longer period
(e.g. whilst on holiday).
Making a large amount of ice cubes
The amount of ice cubes which the
appliance makes depends on the
temperature in the freezer section. The
lower the temperature, the more ice
cubes are produced within a certain
time frame.
Ice cube production is halted
automatically as soon as the ice cube
drawer is full.
If you require a large amount of ice
cubes,
^
replace the full ice cube drawer with
the drawer beside it on the right.
The ice cube maker will begin to
produce ice cubes again as soon as
this new drawer has been placed in
position and closed properly.
Making ice cubes
38