Filter
Top Products
The appliance is equipped with an
alarm system to ensure that the
temperature in the freezer section does
not rise unnoticed, and to avoid energy
being wasted if the door is left open.
Temperature alarm
If the temperature becomes too warm,
an alarm will sound and the
temperature display will flash. The
temperature the appliance is set at will
determine when the alarm is triggered.
The alarm will sound and the display
will flash under the following conditions:
– whenever too much warm air flows
into the appliance, for example when
food is being loaded, re-arranged, or
taken out.
– whenever large amounts of food are
being frozen at once.
– whenever there has been a lengthy
interruption of the power supply.
Door alarm
If the appliance door is left open for
longer than approx. 60 seconds, the
alarm signal will sound.
Switching the alarm system
ON
The alarm system is always active. It
does not need to be switched on
manually.
Switching the alarm OFF early
Once the set temperature has been
reached in the freezer section, the
alarm signal stops and the temperature
display stops blinking. If the alarm
signal bothers you, it can be switched
off early.
^ Press the alarm off button. The alarm
signal will stop. The temperature
display will continue to blink until the
set temperature has been reached.
The display then stops blinking, and
shows a steady reading. At this point,
the alarm system is ready again if
needed.
Alarm
17