Filter
Top Products
Remember that it can take up to 24
hours for the first ice cubes to be
produced.
. . . the indicator light on the ice cube
maker is flashing? * (may vary by
model)
This indicates a problem. Call the ser
-
vice department.
. . . the interior light is not working?
^
Was the refrigerator section door left
open for too long? The lighting
automatically switches off after the
door has been open for approx. 15
minutes.
The light uses 2 light bulbs, which are
located behind a cover, high in the
refrigerator section. If the bulbs are
defective, take the following steps:
^ Unplug the appliance, or turn off the
main breaker for the house electrical
supply.
^
Unscrew the retaining rail a, then
pull it forward and off.
^
Carefully remove the glass plate b.
^
Unscrew the defective light bulb and
replace it with a new one. Light bulb
specification:
115 V, max. 25 W, E 14 screw base.
^
Screw the new bulb into the socket.
Ensure that it goes in correctly and
that the seal c forms a tight fit.
^ Now carefully re-insert the glass plate
and re-attach the retaining rail.
. . . the floor of the refrigerator is
wet?
The drain hole is blocked.
^ Clean the condensate channel and
the drain hole.
If an error cannot be corrected using
this problem solving guide, please
contact the Miele Service
Department. To prevent the
unnecessary loss of temperature, it
is recommended that you not open
the appliance doors while waiting for
the technician to arrive.
Troubleshooting...
35