Filter
Top Products
Cleaning the ice cube tray*
(*may vary by model)
Before the ice cubes drop down into
the drawer, they are formed in an ice
cube tray.
This tray should be cleaned regularly,
to remove any stale ice or water.
^
Connect the appliance to the power
supply.
^
Press the on/off button, and the
indicator light will now come on.
^
Empty the ice cube drawer.
^ Hold down the on/off button for the
ice cube maker for approx. 10
seconds (after approx. 1 second the
ice cube maker will switch off and the
indicator light will go out).
The indicator light will now flash.
^ Within the next 60 seconds, push the
ice cube drawer in as far as it will go.
This will cause the ice cube tray to
rotate into an angled position, which
makes it easier to clean.
^
Wait until the rotation has stopped
before continuing.
^
Now take the ice cube drawer out of
the appliance.
^
Clean the ice cube drawer and th
eice cube tray with warm water and
some mild dish liquid.
^
Press the ON/OFF button for the ice
cube maker.
The ice cube tray will now return to its
original position.
^
Now put the ice cube drawer back in
the appliance and close it.
The ice cube maker will begin to
produce ice cubes again within 6
hours.
If the ice cube maker has not been
used for a longer period of time, it is
important to clean it before making
ice.
Cleaning the exterior coils
^ The ventilation slits should be
cleaned on a regular basis, with a
brush or vacuum cleaner. A build-up
of dust will increase the amount of
energy the appliance consumes.
Door seals
Do not use any grease or oil on the
door seals, because they will cause
the seals to deteriorate over time.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
Cleaning and care
31