Filter
Top Products
Before using for the first time
Protective foil
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
scratching during transportation.
^
Carefully remove the protective foil
from the stainless steel trim.
Cleaning
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Switching on
^ Turn the On/Off and temperature
selector in a clockwise direction
away from the "0" position.
The higher the setting, the lower the
temperature in the appliance.
The appliance will start cooling and the
interior light in the refrigerator section
will come on if you open the door.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Switching off
^
Turn the On/Off and temperature
selector in an anti-clockwise direction
from "1" back to the "0" position. You
will meet a little resistance, but this
should be ignored.
The interior light will not come on when
you open the door and the cooling
process will be switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ disconnect it from the mains. Switch
off at the wall and withdraw the plug
from the socket, or disconnect the
mains fuse.
^ defrost the freezer section,
^
clean the appliance out and
^
leave the doors ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the doors are left
shut, there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
18