Filter
Top Products
Refitting the appliance doors
^
Place the lower door onto hinge pin
k.
^
Close the lower door.
^
Turn middle hinge plate f 180°, fit to
the opposite side of the the lower
door and secure it with screws e.
^
Fit plastic cover g.
^
Then fit the upper door onto middle
hinge plate f.
^
Fit upper hinge plate c to the
opposite side on the upper door and
secure it with screws d. If necessary
drill pilot holes for the screws or use
a battery operated screwdriver.
^ Push cover a onto hinge plate c,
making sure that it clicks into place.
^ Click cover b back into place on the
opposite side.
^ Unscrew foot m until it sits on the
floor.
Changing the door handles
^
Carefully remove cover a and
stoppers b from the sides using a
flatheaded screwdriver.
^
Push cover c to the left by placing a
suitable wooden or plastic tool d in
the groove on the right hand side.
^ Carefully remove cover c.
Be careful not to let the tool slip,
causing damage to the appliance.
^
Loosen screws e on the handle side
and in the middle, and remove
handle f.
Changing the door hinging
45