Moyer Diebel 301HT M2 Dishwasher User Manual


  Open as PDF
of 50
 
4
Water Connections
1. Connectthehotwatersupplytothellhoseprovidedwitha3/4"NPTtting.
2. Install a manual shut-off valve in the water supply line to accommodate servicing the
machine. The shut-off valve should be the same size or larger than the supply line and
installed as close to the dishwasher as possible.
3. Installa3/4"pressurereducingvalve(PRV)(suppliedwithmachine)inthewatersupply
line, and set at 20-22 PSI/138-151kPa. Install the PRV downstream from the service
shut-off valve and as close to the dishwasher as possible.
Drain Connections
1. Drain hose must be supported by bracket provided (shipped inside of machine).
2. Thedrainhosebracketmustbemountedaminimumof2feetabovethenisheddrain,
either on the rear of the machine or on the wall.
3. Themaximumheightofthedrainfromtheoormustnotexceed3feet.
4. Connectthe3/4"I.D.exibledrainhosetoa1-1/2"wye(Y)draintting.Usea3/4"hose
Plumbing Connections
Note:
Plumbing connections must comply with local health and plumbing codes.
Installation
Connect machine exible
drain hose to a wye tting.
Do not connect the machine
exible drain hose to a
90° tting.
 previous next