Nespresso BEC800 Coffeemaker User Manual


 
1:
2:
3:
4:
5:
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
EN
EMPTYING MODE
1. While in menu mode, set Espresso button to position 3
for emptying.
4. Turn steam handle to ON.
7. Machine switches o automatically when nished.
2. Remove water tank and lift lever.
5. Adjust steam pipe into steam out position.
NOTE: appliance will be blocked for approximately 20 minutes after emptying.
3. Press Lungo button to empty machine (ready when
coee lights stop blinking).
6. Set steam handle to :
Middle light blinking: emptying
Middle light steady: done
COFFEE & STEAM PIPE
MENU MODES
1. To enter menu modes, press and hold the Espresso button
while turning the machine on (middle light steady orange).
2. Set the dials to the required settings (see
chart below).
Set Espresso dial to: Set Lungo dial to:
Auto Shut O 1: 9 min, 2: 30 min, 3: 60 min, 4: 2 hrs, 5: 8 hrs
Water Hardness 1: hard, 2: medium, 3: soft
Emptying See emptying section
Reset To Factory Setting
3. Once selected, press the Lungo button to conrm (middle light steady to
conrm, and blinks orange accordingly to selected number).
NOTE: when in menu mode you can change between options without exiting each time. To exit menu mode, press and hold the Espresso button
for 5 seconds (steady coee lights conrm exit).
Descaling See descaling section
Simply press the Lungo button to reset to factory setting (power save: 9 min, water hardness level: hard).
NOTE: your machine should be emptied before and after a long period of non-use.
18
19
5927_MAESTRIA_MASTER_2012_v12.indd 20-21 07.02.13 14:55