Nespresso BEC800 Coffeemaker User Manual


 
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
1: 25 ml
2: 30 ml
3: 40 ml
4: 50 ml
5: 60 ml
1: 70 ml
2: 90 ml
3: 110 ml
4: 130 ml
5: 150 ml
EN
COFFEE PREPARATION
1. Rinse and ll water tank with potable water.
4.
Lift lever and insert Nespresso capsule.
7. Turn dial to desired coee
level and press button to start
brewing.
NOTE: during heat up (blinking lights), you can press the coee button. Coee will start to ow automatically when machine is ready.
During coee preparation, steam function is not possible.
2. Reposition water tank .
5. Close lever and place cup under coee outlet.
8. The preparation will stop automatically, or press any
coee button to stop the preparation at any time.
3. Close lever and switch machine on.
6. Cup support can be turned up right to support Macchiato
glass.
9. Remove cup. Lift and close lever to eject capsule into
container.
Blinking lights: heat up (25 sec.)
Steady: ready
1. Fully insert cup support into upright position, remove
maintenance unit and water tank.
First read the safety precautions to avoid risks of fatal electrical shock and re.
4. Close lever and plug into mains.
7. Lift cup support and place container (min. 0.5L) under
coee outlet.
8. Set Lungo button to 5 and press to rinse the machine.
Repeat 3 times.
*NOTE: for this operation only, machine can be placed on it’s side on a soft surface to avoid any damage to the nishing.
5. Rinse and ll water tank with potable water. Reposition
water tank and maintenance unit.
6. Switch machine on.
3. Ensure steam handle is set to o, and steam pipe in
vertical position.
Blinking lights: heat up (25 sec.)
Steady: ready
2. Adjust cord length and store excess under machine with
cord storage xation.*
PREPARING YOUR MACHINE FOR FIRST USE
NOTE: automatic power o: machine stops automatically after 9 minutes of non-use. To change this setting visit auto shut o section in menu
mode page 18.
10
11
5927_MAESTRIA_MASTER_2012_v12.indd 12-13 07.02.13 14:55