Filter
Top Products
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
ml
EN
DESCALING MODE
CARE & CLEANING
1. To remove maintenance unit from machine, lift cup
support in upright position.
3. Wipe down the steam pipe with a damp cloth.
2. Maintenance unit can be removed in one piece and
assembled/disassembled for easy cleaning.
4. To remove the frothing sleeve, twist the nozzle clockwise until it comes out then pull the sleeve downwards.
Sleeve can be washed in soapy water. Make sure openings are free of residue.
STEAM PIPE CLEANING
DO NOT WASH PARTS IN A DISHWASHER
CAUTION: use extreme caution when handling the steam pipe. Use rubber grip area only to avoid injury. Turn steam handle to OFF and
allow for it to cool down before handling.
For better performance and hygienic purposes clean your steam pipe after each usage to avoid milk residues from remaining inside and
outside the steam nozzle.
NOTE: duration approximately 20 minutes. Steady orange middle light indicates descaling is needed.
7. Set steam handle to .
1. Turn machine o and set Espresso button to 4 and
Lungo button to 1.
2. Open and close the lever to eject the capsule. 3. Empty drip tray and used capsule container and
replace.
5. Fill water tank with 2 Nespresso descaling liquid agents
and the rest with water.
8. Press Lungo button to start descaling. ddle light will
start to blink.
6. Place a container (min 1.5 L) below coee outlet and
steam pipe.
9. A mix of operations between coee and steam pipe
ow will occur. Do not touch the machine during this
operation. Steady middle light indicates descaling is
complete.
4.
To enter descaling mode press and hold the Espresso
button while turning the machine on. Middle light
steady orange to conrm descaling mode.
20
21
5927_MAESTRIA_MASTER_2012_v12.indd 22-23 07.02.13 14:55