Tools
113
Copyright
© 2003 Nokia. All rights reserved.
• Access point name (for packet data only) - The access point name is needed to
establish a connection to the GPRS network. You obtain the access point name
from your network operator or service provider.
• Dial-up number (for Data call and High speed (GSM) only) - The modem
telephone number of the access point.
• User name - Write a user name if required by the service provider. The user
name may be needed to make a data connection, and is usually provided by the
service provider. The user name is often case-sensitive.
• Prompt password - If you must key in a new password every time you log on to
a server, or if you do not want to save your password to the phone, choose Yes.
• Password - A password may be needed to make a data connection, and is
usually provided by the service provider. The password is often case-sensitive.
When you are writing the password, the characters you enter are shown briefly
and then changed to asterisks (*). The easiest way to enter numbers is to press
and hold the digit you want to enter, and then continue entering letters.
• Authentication - Normal / Secure.
• Homepage - Depending on what you are setting up, write either:
• the service address, or
• the address of the multimedia messaging centre.
• Data call type (for GSM data and high speed data only) - Analogue, ISDN v.110,
or ISDN v.120 defines whether the phone uses an analogue or digital
connection. This setting depends on both your GSM network operator and
Internet service provider (ISP), because some GSM networks do not support