Filter
Top Products
7
INSTALLATION INSTRUCTIONS
Gas Supply Requirements
Installation of this range must conform with local codes, or in the absence of local codes,
than national Fuel Gas Code, ANSIZ223.1 / NFPA 54. In Canada, installation must
conform to the current natural Gas Installation /code, CAN 1-1.1-M81 and with local
codes where applicable. This range has been design-certified according to ANSIZ21.1a,
latest edition.
MINIMUM GAS SUPPLY PRESSURE TO APPLIANCE FOR LP GAS---13.0 IN.W.C.
MINIMUM GAS SUPPLY PRESSURE TO APPLIANCE FOR NG ---10.0 IN.W.C.
APPLIANCE REGULATOR IS SET AT 5.0 IN. W.C. OUTLET PRESSURE.
Keep appliance area clear and free from combustible materials, gasoline, and other
flammable vapors.
Do not obstruct the flow of combustion air into the range and ventilation air away from
the range.
Ventilation: it is recommended that the unit be set under a powered, vented exhaust
hood of sufficient size and capacity.
Before installing the range, you must locate and secure the included anti-tip bracket to
the wall for your range.
The use of cabinets for storage above the appliance may result in a potential burn
hazard. Combustible items may ignite; metallic items may become hot and cause
burns. If a cabinet storage is to be provided, the risk can be reduced by installing a
range hood that projects horizontally a minimum of 5" (12.7cm) beyond the bottom of the
cabinets.