Oster 3320 Food Processor User Manual


 
www.oster.com
5
HOW TO:
Assembling the Unit
1 Remove all packaging materials before using.
2 Before using, wash lid, blade, whisk and bowl in warm soapy
water; rinse and dry thoroughly, see CARE AND CLEANING.
3 On a  at surface place the bowl, without lid and chopping
blade, on the base and turn clockwise to
lock into position.
NOTE: Rotate the bowl until it snaps into place.
4 Slide the chopping blade or whisk attachment down over
the shaft, rotating if necessary to drop into place.
5 Place the lid on the bowl, then turn clockwise into lid
locking slot. Continue turning the lid into the lid locking
slot as far as it will go so that the dot on the lid lines up with
the dot on the base.
NOTE: For your protection, this unit has a safety lock lid. The
unit will not operate unless the lid and base dots align. Do not
attempt to operate the unit without locking the lid in place.
Chopping
1 Cut food into approximately 1.5 cm (1/2 inch) pieces
and place up to 3 cups of dry food in the bowl at a time.
2 Place the lid on the bowl and turn to lock into place.
3 Plug the cord into an outlet. Press and hold either the HI or
LO Pulse button for 5–10 seconds and then release; the
motor will stop. Repeat for a  ner consistency.
4 When nished chopping, allow chopping blade to stop
rotating before removing contents.
5 Remove the lid and grasp the stem of the chopping blade.
Carefully remove it from the bowl. Remove the bowl from
the base and empty the processed food.
NOTE: Do not use bowl for storing food.