Filter
Top Products
19
2
Release the Pulse button to stop. The START/STOP
light will blink, indicating that the product is
ready to start. If you do not use the product for
1 minute, it will reset to the ready state.
3 When you stop, press the arrow button next to
MAIN MENU or wait about 20 seconds to return
to the MAIN MENU.
4 Press the POWER button to turn the product Off.
If the jar is ever removed from the base while the
product is running, the motor will stop as quickly
as possible and error tones will sound.
After Use
1 Lift the jar straight up from the base, remove the
lid and empty the jar.
2 If necessary, use a rubber spatula to scrape foods
away from the sides of the jar.
Using your ProductUsing your Product
18
5
Press the START/STOP (or Pause/Resume)
button when you finish. The START/STOP light
will blink again.
6 If you wish, you can press the START/STOP
button again to continue at the same speed.
Using the Pulse Button
To MANUALLY run the product in short bursts use the
Pulse button. Pulse only works in MANUAL mode or
after a program has finished. Pulse continues from
the last selected action. So, if the last action was at a
High setting, you will now Pulse at High. If the last
action was at a Low setting, you will now Pulse at
Low.
1 Press and hold in the Pulse button. PULSING!
flashes as the product pulses at your selected
setting.
MANUAL
Speeds
Low High
PULSING !
MAIN MENU
Speeds
Push when ready
START
Low High
Speeds
Low High
Press when
finished.
STOP