Filter
Top Products
– 46 –
C-3. Checking the disk settings
Checking the Windows NT volume-related status information
On the Disk Administrator dialog box, check that the disk statuses are as
shown below.
Disk No. Drive name Format
Disk 0 C:, D: NTFS
Disk 1 O: RTLFS
Disk 2 O: RTLFS
Disk 3 O: RTLFS
Disk 4 O: RTLFS
Disk 5 L: RTLFS
CD-ROM E:
___
¬
There are not enough disks
¬
¬
The displayed data differs from the above table
¬
O
Following the instructions in C-6 (page 52), exit the Disk Administrator and
Windows NT, and try rebooting the unit.
Perform the checks in C-2 and C-3 again when the unit is started up again.
O
If the status still remains unchanged, an incorrect disk setting or defective
disk may be to blame.