Filter
Top Products
23
Installation
Attaching the wire
[Multi-purpose camera AK-HC1500G]
The camera comes with a wire for preventing the camera from dropping. Follow the instructions below to use it to couple the
camera to the pan-tilt head.
Use the wire mounting screw (M48 mm with flat washer and spring washer) to attach one end of the wire to the pan-tilt
head’s arm.
Use the wire mounting screw (Inch screw with flat washer and spring washer) to attach the other end of the wire on the top
panel of the camera.
For a stand-alone installation
Wire mounting
screw (Inch
screw with flat
washer and
spring washer)
Wire
Arm
M48 mm wire
mounting screw with
flat washer and spring
washer
Camera: AK-HC1500G
For installation on the ceiling
M48 mm wire mounting
screw with flat washer and
spring washer
Wire mounting
screw (Inch screw
with flat washer and
spring washer)
Camera: AK-HC1500G
Be absolutely sure to tighten up the screws securely using a tool such as a screwdriver.