Filter
Top Products
29
Specifications
Genlock input: BNC
Black burst or composite video signal, Tri Sync
Prompter input
(PROMPTER IN): BNC
Through output to PROMPTER connector
Prompter output
(PROMPTER OUT): D-SUB 15-pin
Camera video output
VIDEO: BNC, 75-ohm output
Y: BNC, 75-ohm output
Pr/C: BNC, 75-ohm output
Pb: BNC, 75-ohm output
SDI: BNC
AUX: BNC
Camera, pan-tilt head control: RJ45, RS-422, pan-tilt head control signal output
RP Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),
max. 3281 ft (1000 meters)
Functions/performance: Maximum weight capacity: 33.1 lbs (15 kg)
Tilt range: 300 degrees (approx. ±150 degrees)
The tilt range is subject to restrictions depending on the cable and lens of camera to be
mounted on pan-tilt head.
Pan range: 300 degrees (approx. ±150 degrees)
Maximum operating speed: 45 degrees/sec.
( when the center of gravity of the units installed on the pan-tilt head has been aligned with
the head’s center of rotation)
(Maximum operating speed with prompter mounted: 15 degrees/sec.)
Stop accuracy: ±3´
Noise level: Less than NC35 (at less than 30 degrees/sec.)
Ambient operating temperature: 23°F to 113°F (–5°C to +45°C)
Storage temperature: –4°F to 149°F (–20°C to +65°C)
Ambient operating humidity: 30% to 90% (no condensation)
Dimensions (WHD): 12-9/16”16-3/8”6-5/8” (319416168 mm)
Weight: Approx. 22 lbs (10 kg)
Finish: AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)
Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
Supply voltage: AC 120 V, 60 Hz
Power consumption: 120 W
indicates safety information.