Filter
Top Products
- 10 -
CONTROLS TO USE
8
7
5
3
2
9
Convection
Start
Microwave
Stop
Cooling
Lamp
Preheat
4
1
0
Prog Lock Beep
Reset
/
6
INFORMATIONACTION DISPLAY
1 Open Door.
Put in Food.
Close Door.
The oven lamp will come on.
Oven lamp turns off.
2 Press
Convection
Pad.
Select required oven
temperature.
Continue to press
Convection Pad until
temperature required
appears in display window.
Temperature counts up in
25˚F increments
from 175˚F-500˚F
3 Select Time.
Turn Timer Dial to set a
heating time.
Max heating time: 2 h
Timer counts up in:
30 s intervals 0-10 min
1 min intervals 10-60 min
10 min intervals 1 h-2 h
4 Press
Start Pad.
Display will count down time.
The Convection fan turns on.
At end of heating program,
oven beeps, and “0” flashes
in display window until door is
opened.
Remove food.
Display repeats program
previously set.
5 Open Door.
ACCESSORIES TO USE
For best results place food on Wire
Rack Shelf in the LOWER position.
Caution:
The oven does not have a NON-TIP Safety Lock on Wire Rack Shelf.
Please be careful when removing food.
Convection
Start
End of Program
Open Door
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
To switch between Celsius (“C”) and Fahrenheit (“F”):
1 Open Door. The display window must show “0”.
KEEP DOOR OPEN.
2 While
pressing Start Pad,
press and hold Convection Pad.
“F” appears.
(“C” appears.)
+
Start
Convection
3 Keep pressing
Start Pad and Convection Pad.
After 2 seconds, “C” appears.
(After 2 seconds, “F” appears.)
After 3 seconds, display returns to
“0” or blank.
Operating Oven in Convection mode
Example:To cook food at 375˚F for 18 minutes
If required, preheat oven to desired temperature. (See page 18.)