Filter
Top Products
- 16 -
CONTROLS TO USE
8
7
6
5
3
9
Convection
Start
Microwave
Stop
Cooling
Lamp
Preheat
4
1
0
Prog Lock Beep
Reset
/
2
INFORMATIONACTION DISPLAY
1 Open Door. The oven lamp will come on.
2 Press
Program
Lock Key
Keep key pressed for
2 seconds until “P” is
displayed.
KEEP DOOR OPEN.
After 2 seconds, “P L”
appears in display window.
After 3 seconds, display
reverts to “0”.
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
PROGRAM
1
2
3
TIME
MICRO
%
PREHEAT
CONV
STAGE
One Touch Operating Mode
When Program Lock is activated, oven operates in “ONE TOUCH” mode
for program “00” to “09”. Press required memory program number “0” to
“9” and oven will immediately start.
No need to press Start Pad.
Note: When Program Lock is activated, it is NOT possible to use
Program “10” to “99”.
Setting New Programs
When the Program Lock is activated, it is not possible
to enter a Memory Program, to change the Beep Tone
or Preheat Temperature.
LOCKLock
How to activate the Program Lock