Filter
Top Products
PG14D: Floor Model Gas Pasta Cooker INSTALLATION
1
Accessories
# Description PG14D RS14D
1 Basket Hanger Standard Standard
2 Tube Rack Standard N/A
3 Drain Cleanout Rod Standard
4 Small Bulk Pasta Basket Optional Optional
5 Large Bulk Pasta Basket Optional Optional
6 Small Round Pasta Basket Optional Optional
7 Large Round Pasta Basket Optional Optional
8 Oblong Pasta Basket Optional Optional
9 Portion Cups with Rack Optional Optional
1. INSTALLATION
1.1. CHECKING YOUR NEW APPLIANCE
Your new Pitco appliance has been carefully packed into one crate. Every effort has been made to
ensure that it is delivered to you in perfect condition. As you unpack your new appliance, inspect each
of the pieces for damage. If something is damaged, DO NOT sign the bill of lading. Contact the
shipper immediately; the shipper is only responsible for 15 days after delivery. Check the packing list
enclosed with your appliance to ensure that you have received all the parts to the appliance. If you
are missing any parts, contact the dealer from whom the appliance was purchased. As you unpack
the appliance and its accessories be careful to keep the weight of the appliance evenly distributed.
Refer to the table below to identify which accessories should be included with your appliance.
Locate your Pitco model number and serial number on the inner door of the appliance and the find
the date purchased. Write this information on the front cover of this manual for future reference.
If you have completed the above
steps that are applicable to the
appliance you purchased, the
appliance is now ready to be
installed. Although it may be possible
for you to install and set up your new
appliance, it is STRONGLY
recommended that you have this
done by qualified professionals. A
qualified professional will ensure that
the installation is safe and meets
local building and fire codes.