Filter
Top Products
USERS GUIDE
Page 11
This will lock the hinges in the open
position.
Stand in front of the oven and grasp the
open door with one hand on each side.
Lift the door as if closing it until it is at
an angle of about 30º, then continue
lifting the door towards you, out of the
hinge slots. The door can now be placed
on a convenient surface for cleaning.
Do not immerse the door in water.
Clean the enamelled interior surface and
the glass using a damp cloth and a
proprietary mild cream cleaner, rinse,
and then dry carefully using a soft cloth.
If necessary, the inner door glass can be
removed by unscrewing the two lateral
fixing screws (see diagram). Make sure
that the glass is dried thoroughly before
re-fitting. Take care not to over tighten
the fixing screws when re-fitting.
Re-fit the door by holding at a 30º angle
and locating the locked hinges in the
hinge slots. Open the door fully,
disengage the metal loops (A) and lower
them so that they lie flat on the hinges
(B). Close the oven door.
Removing the shelf supports
Some models have detachable shelf
supports, which can be removed, from
the oven for cleaning by hand or in a
dishwasher.
Grasp the shelf support and press
downwards to release from the clip
device on the lowest runner (see
diagram).
The shelf support can then be hinged
upwards and lifted from the mounting
holes in the upper corners of the oven
prior to removal.
To re-fit the shelf supports, reverse the
procedure, ensuring that the clip device
engages firmly on the lowest runner.
Oven accessories
The oven shelves, oven pans and trivets
should be washed in hot water with a
mild detergent then dried carefully, or
they can be washed in a dishwasher.
Cleaning the oven interior
The interiors of the ovens have an
enamelled finish. In order to make
cleaning easier, any spillages should be