11
3. Looking after your Dishwasher
Care
After Every Wash
After every wash, set the ON-OFF button to OFF and leave the
door slightly ajar so that moisture and odours are not trapped
inside.
Before cleaning or performing maintenance isolate
from mains.
Overall condition of appliance
Check that no grease or scale has accumulated on the inside
of the dishwasher. If you discover any deposits: Clean the
interior of the dishwasher thoroughly with a detergent
solution.
Dishwasher salt
Check the LOW SALT indicator. Top up with salt, if required
(Fig.3-1).
Rinse-aid
Check the LOW RINSE AID indicator (Fig.3-2), on the front
panel. Top up with rinse-aid if required.
Filters
The filters prevent larger particles of food in the water from
reaching the pump. These particles may occasionally block
the filters.
When the appliance has finished washing, check the filters for
particles of food and, if required, clean.
After undoing the coarse micro-filter (Fig.3-3), the filter unit
can be removed (Fig.3-4). Remove any particles of food and
rinse the filters under running water.
Insert the filter unit and tighten the coarse micro-filter.
ArtNo.800-0203 -
Low salt indicator
ArtNo.800-0205 -
Low rinse aid indicator
Fig.3-1
Fig.3-2
ArtNo.800-0501 - Cleaning the filter 1
ArtNo.800-0502 - Cleaning the filter 2
Fig.3-3
Fig.3-4
DocNo.800-0301 - Care & maintenance - RDW6012 dishwasher