Filter
Top Products
18
Securing the Dishwasher
Using the two screws supplied, secure the dishwasher to the
underside of the worktop (Fig.5-12).
For non-wooden worktops (e.g. marble) two brackets are
provided to allow the appliance to be secured to the sides
of the adjacent cabinets. Secure the appliance using the
two screws at the top of the chassis (Fig.5-13); adjust to the
correct width and then screw to the adjacent side panels
using suitable screws.
Adjusting the Door Springs
The door balance can be adjusted via two nuts accessed
through the two holes in the top of the front frame
(Fig.5-14). Using the tool supplied, adjust these until the
door remains just open under its own weight and is level
when open.
Fitting the Plinth
Cut clearance in the plinth to allow the door to fully open and
seal edges with a suitable silicon sealant to prevent water
ingress (Fig.5-15).
ArtNo.800-0114 - Securing the dishwasher
ArtNo.800-0114 - Securing the dishwasher
ArtNo.800-0119 - Adjusting the door springs
Fig.5-12
Fig.5-13
Fig.5-14
Fig.5-15