Filter
Top Products
12_ setting up
Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
1
using a screwdriver, and
then disconnect the wires by gently pulling them apart
2
.
2. Remove hinge screws
3
and the ground screw
4
by turning counter-clockwise, and take
off the upper hinge
5
. Be careful that the door does not fall on you as you are removing it
3. Next, remove the door from the lower hinge
6
by carefully lifting the door straight up
7
.
4. Remove the lower hinge
8
from the bracket
9
by
gently lifting the lower hinge upwards.
Reattaching the freezer doors
To reattach the freezer doors, assemble parts in reverse order
6
2
1
Be careful not to pinch
the water tubing and
wire harness on the
door.
9
3
4
5
Be careful not to miss
the parts of refrigerator.
7
DA99-01745A(EN)-GGH-0.3.indd 12 2008.8.20 8:41:55 PM