Filter
Top Products
14_ setting up
LEVELLING THE REFRIGERATOR
Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you
can make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly
even.
The front of the refrigerator is also adjustable.
Before levelling the refrigerator, remove the front leg cover
Open both the freezer and fridge doors, and then take off the front leg cover
by turning the three screws counter-clockwise.
When the Freezer door is lower than the fridge
Insert a flat-blade screwdriver into a slot on the Leg, turn it clockwise or counter clockwise to
level the freezer.
When the Freezer door is higher than the fridge
Insert a flat-blade screwdriver into a slot on the Leg, turn it clockwise or counter clockwise to
level the fridge.
Refer to the next section for the best way to make very minor adjustments to the doors.
Leg
Screw Driver
Leg
Screw Driver
DA99-01745A(EN)-GGH-0.3.indd 14 2008.8.20 8:41:58 PM