TO BAKE OR ROAST
PUSH WHEN TURN TO
FINISHED SET TEMP
PUSH
The red display will show the oven temperature as it rises (in
5° steps).
Atone will sound when the oven is ready.
DELAYED BAKE CYCLE
TURN TO TURN TO
SETLENGTH SET TEMP
OFCOOK
TIME
TURN TO
SETOVEN--
TURN OFF
TIME(TIME
OF DAY)
T_ER CLOCKSTOP COOK
TIME CLEAN TIME BROIL BANE
PUSH PUSH PUSH
When cook time has ended, a tone will sound and the oven
willturn off.
AUTOMATIC OVEN OFF
TURN TO SET TURN TO
LENGTH OF I SET TEMP
COOK TIME
orE. -_l.n n 3oDo
T,., ___LI LI
TO USE THE TIMER
TURN TO
SET AMOUNT
OF TIME
SET
COOK
TIMERCLOCKSTOPCLEAN BROILBAKE
TIME TtME
PUSH PUSH
The control will calculate when to turn the oven off.
When the stop time is reached, a tone will sound and the
oven will turn off,
PUSH PUSH AND HOLD
3 SECONDS TO CANCEL
A tone will sound when time is up.
NOTE: Thetlmerlsaremlnderonlyandwillnotoperate
the oven.
INCOMPLETE OR INCORRECT
SETTINGS
1. Attention Tone will sound if oven has only been partially
programmed. For example, il you have selected acook
time but no temperatu re, you will hear the Attention Tone
until you select a temperature or push CANCEL.
2. Function Error Tone will sound if there is a problem with
oneofthe range functions. Cancel the tone bypushing
the CANCEL button. If the tone starts again, call for
service.
RECALLING FUNCTIONS
You may recall any set function by pushing the button ofthat
function.
CANCELLING TONES
If you prefer that your range not have a tone whenever you
push a button, you can eliminate those tones by pushing and
holding the CANCEL button until you hear a beep. Repeat
to activate tones again.
PREHEATING FOR AUTOMATIC OVEN
OPERATIONS
Cook times programmed for automatic oven operations start
counting down when the oven first comes on, notwhen it has
reachedthe set temperatures. It takes 10to 15 minutes to
reach the set temperature, thus additio nal cook time may be
necessary.
16
CCTL01-8