Filter
Top Products
Before Calling for Service
PROBLEM POSSIBLE CAUSE DON'T CALL FOR SERVICE
UNTIL YOU CHECK
Foods do not broil Improper rack position Check broil pan placement; see Broiling
properly section.
Oven preheated Do not preheat when broiling.
Improper ulensil used Use broiler pan and grid supplied with range.
Improper broilingtime Check broilingchart.
Oven smokes Dirty oven Check for heavy spillover.
Broiler pan full of grease left in Clean pan and grid after each use.
oven
Oven light or work Light switch in oft position Check switch setting.
lightdoes not work Light bulb or fluorescent light Check or replace light bulb or fluorescent
(it equipped) starter burned out light starter; see use and care instructions.
Oven does not clean Controls not set properly Check self-clean instructions.
or poor cleaning Clean cycle interruptedtoo Heavily soiled ovens require a 3 1/2 hr. clean
results (Self-clean soon cycle.
models only) Oven too dirty Heavy spillovers should be removed before
settingclean cycle.
Oven door will not Clean cycle not complete • Oven must cool below lock temperature
unlock (Self-clean (20 to 30 minutes after clean cycle is
models only) complete).
Tone does not sound Tone has been eliminated by Push and hold CANCEL button to activate
pushing and holding CANCEL tone.
button
Heavily soiled or Spills were not wiped up See the instructions, under Cleaning Tips,
stained chrome promptly for cleaning chrome cooktops with oven
cooktop cannot be cleaner. This procedure requires extreme
satisfactorily cleaned caution. Read instructionscarefully.
ADJUSTING OVEN TEMPERATURE
The temperature in your new oven has been set correctly at
the factory, so be sure to follow the recipe temperatures and
times the first few times you bake in your new oven.
If you think the oven should be hotter or cooler, you can adjust
ityourself. To decide how much to change the temperature,
set the oven temperature 25°F higher or lower than the
temperature in your recipe, then bake. The results of this
'lest" should give you an idea of how much the temperature
should be changed.
To Adjust Oven Temperature:
1. Push the BAKE button.
2. Select a temperature between 500°F and 550°F with the
SET knob.
3. Quickly (within two seconds, before the BAKE Function
energizes) push and hold the BAKE button.
The display will change to the amount of degrees differ-
ence between the original factory temperatu re setting and
the current temperature setting. If the oven has the origi-
nal factory setting, the display will read go.
4. The temperature can be adjusted up to 35°F hotter or
cooler (in 5°F steps), by turning the SET knob. A minus
sign (-) before the number means that the oven will be
cooler by displayed amount of degrees.
5. When you have made the desired adjustment, push the
CLOCK button to go back to the time of day display or use
your oven as you would normally.
Note: The self-clean temperature will not be changed by the
adjustments described above.
26 GSERO84