Filter
Top Products
65
Selecting the standard display
DISPLY
Display
Via the “Display” menu, you can select the standard display.
SR 300 IEM G2 stereo transmitter
EK 300 IEM stereo receiver
Entering a name
NAME
Name
Via the “Name” menu, you can enter a freely selectable name for the
transmitter and the receiver. You can, for example, enter the name of the
performer for whom the adjustments have been made.
The name can be displayed on the standard display and can consist of up to
ten characters (transmitter) and up to six characters (receiver) such as:
y letters (without pronounciation marks),
y numbers from 0 to 9,
y special characters e.g. () - . _ and spaces.
To enter a name, proceed as follows:
̈ Press the SET button to get into the setting mode of the “Name” menu.
The first segment starts flashing on the display.
̈ With the ̆/̄ buttons you can now select a character. By briefly pressing
Selectable standard display Contents of standard display
“Frequency”
(display of the frequency)
“Bank/Channel”
(display of the channel bank
and channel number)
“Name”
(display of the freely selectable
name)
Selectable standard display Contents of standard display
“FREQ”
“NAME”
“CHAN”