Filter
Top Products
47
“MUTE” display
The “MUTE” display ቨ appears on the display panel when the RF signal of the
received transmitter is too weak.
“PILOT” display
The “PILOT” display ቧ appears on the display panel when the pilot tone
evaluation is activated (see “Activating/deactivating the pilot tone
evaluation (receiver only)” on page 66).
RF signal indication
The green LED (RF) ᕤ at the front of the receiver lights up when an RF signal
is being received.
However, the green LED (RF) does not light up when the audio output is
muted because
y the RF signal of the received transmitter is too weak,
y the transmitter is set to mono operation and the receiver’s pilot tone
evaluation is activated.
Display backlighting
After pressing a button, the display remains backlit for approx. 15 seconds.
ቨ
ቧ
¿