Filter
Top Products
26
Document Control Setting
Step 3:
Select settings as desired from the special modes menu screen and then
press the [COLOR START] key or the [BLACK & WHITE START] key.
(MX-
FR28U only)
Combining the document control function with other functions
● If either the [C(Cyan)] key or the [Y(Yellow)] key is touched in step 2, the
[BLACK & WHITE START] key cannot be pressed.
● When the color mode is single color, document control pattern printing is not
possible.
Function
combined with
document control
Operation of document control pattern printing
Exposure The pattern is always printed at the same exposure regardless of the exposure
setting.
Copy Ratio The pattern is always printed at the same ratio regardless of the ratio setting.
Duplex The pattern is printed on the back side as well as the front side when 2-sided
copy is performed. (The orientation of the original, tablet or book, is not taken
into account.)
Rotation Copy
setting
The pattern does not change when rotation copy is used. (The orientation of
the pattern depends on the orientation of the paper in the tray.)
Margin Shift The position of the pattern does not change when margin shift is used. (The
margin width does not affect the position of the pattern.)
Erase The pattern is printed normally on the edge that is erased.
Pamphlet Copy Printed based on the paper used for pamphlet copy.
Job Build The pattern is printed normally.
2in1 Printed based on the paper. The pattern is printed normally on the sheet of
paper.
Card Shot The pattern is printed once each time the front side and the back side of the
original are scanned.
Stamp If the pattern and the stamp item overlap, the pattern is given priority.
Photo Repeat The pattern is printed once for one scan of a photo.
Mirror Image The pattern is printed in the normal orientation without being inverted.
Centering The pattern is printed normally.
B/W Reverse Patterns are printed normally without black/white inversion.
Bus. Card Scan
(8 Business Cards
Layout)
The pattern is printed normally.
Other functions The pattern is printed normally when RGB Adjust*, Sharpness, Suppress
Background, Color Balance*, Brightness and/or Intensity settings are used.
* MX-FR28U only