Filter
Top Products
Teacher mode
Teacher mode appears when you connect a USB drive to one of the USB receptacles on the side of
your table. This mode enables you to set the number of students, calibrate the surface, synchronize
and choose activity packs and applications, and complete other configuration tasks as documented
in this guide.
For more information on SMART Table Activities, see the SMART Table software and SMART Table
Toolkit user’s guide (smarttech.com/kb/170414
).
Switching modes without inserting a USB drive
You can also switch from Student mode to Teacher mode without inserting a USB drive.
To switch from Student mode to Teacher mode without a USB drive
1. Hold down five fingers on the center of the table.
After approximately 10 seconds, the Cog wheel icon appears in one corner of the table.
2.
While continuing to hold down your fingers on the center of the table, press the Cog wheel
icon with your other hand.
The menu switches to Teacher mode.
3.
Press the Cog wheel
icon to return to Student mode.
CHAPT ER 2
Using your SMART Table
8