Filter
Top Products
60
Instructions for the installer
8. INSTALLING THE APPLIANCE
8.1 Positioning in the counter top
This is a cat. 3 appliance.
The following operation requires building and/or carpentry work, therefore
it must be carried out by a skilled technician.
Installation can be carried out on various materials such as masonry,
metal, solid wood or plastic laminated wood as long as they are heat
resistant (T 90°C).
8.1.1 Fixing to the supporting structure
Create an opening in the counter top with the
dimensions shown in the figure, keeping a
minimum distance of 50 mm from the rear
edge. This appliance can be mounted against
walls higher than the work surface on
condition that a distance of "X" be kept
between the appliance and the wall as shown
in the figure so as to avoid damage from
overheating. Make sure that there is a
minimum of 750 mm between the hob and
any shelf that may be installed directly above
it.
WARNING: IN THE EVENT THAT YOU ARE INSTALLING A HOB
FITTED WITH FISH BURNER, THE DISTANCE "X" FROM THE SIDE
WALL, EXTENDS FROM 110 mm TO 300 mm.
Carefully position the insulating gasket provided on the external perimeter
of the hole made in the hob top, in an attempt to make it stick
on the whole surface with gentle pressure from your hands. After carrying
out these operations, use the 7 brackets provided to fit the hob to the
structure. The figures below show how to use these brackets.