Filter
Top Products
User instructions
21
Before starting a washing program make sure that:
x The water supply tap is open.
x The correct amount of detergent has been added to the
dispenser.
x The baskets have been correctly loaded.
x The spray arms are able to rotate freely and without
obstruction.
x The dishwasher door is securely closed.
When the appliance is used for the first time, set the hardness of the
water and also set the buzzer as required (enabled/disabled). For the
relative instructions, see "CUSTOMISING YOUR APPLIANCE".
SWITCHING ON
With the door open press the ON/OFF key
(A). The dishwasher comes on and the
message shown below appears on the
DISPLAY (G).
PROGRAMMING
On this model of dishwasher, all programming operations are only
possible with the door open.
PROGRAM SELECTION
After the initial message, the system offers you the assisted
programming function (Wizard), in which you only have to select the
level of dirt and the washing strategy.
Shown on the display:
x Press (D) or (E) to select assisted programming (see "Assisted
programming").
x Press (B) to exit assisted programming and choose standard
programming (see "Standard programming").