Filter
Top Products
113
nN
Troubleshooting
What should I do if a BIOS error appears when my computer starts?
If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of the screen
1 Press the F2 key.
The BIOS setup screen appears.
2 Set the date (month/day/year). Press Enter.
3 Press the
m key to select System Time, and then set the time (hour: minute: second). Press the Enter key.
4 Press the
, key to select the Exit tab, and then press the F9 key.
The message Load default configuration now? appears.
5 Select Yes, and press the Enter key.
6 Select Exit (Save Changes), and press the Enter key.
The message Save configuration changes and exit now? appears.
7 Select Yes, and press the Enter key.
The computer restarts.
If this occurs on a regular basis, contact an authorized Sony Service Center. To find the nearest center or agent, visit the
Sony online support Web site.