Filter
Top Products
16
NOTE
Refer to Section 3.3 for sanitizing the
assembled freezer before filling with mix.
L. Install the drain trays (Fig. 30).
CAUTION
DRAIN TRAYS MUST BE IN PLACE BEFORE
OPERATING FREEZER TO PREVENT
DAMAGE FROM POSSIBLE AUGER SEAL
LEAKS.
Figure 30. Drain Trays
3.12 ROUTINE CLEANING
To remove spilled or dried mix for the freezer exterior,
simply wash in the direction of the finish with warm
soapy water and wipe dry. Do not use highly abrasive
materials, as they will mar the finish.
Figure 29. Installing Mix Inlet Regulators