Filter
Top Products
14
CHARBROILER ASSEMBLY
F
ollow these steps to disassemble the
charbroiler for cleaning:
1)
Remove the charbroiler grate. Refer to the
illustration below.
2
)
R
emove the radiant plate. Refer to the
illustration below.
3)
Remove the charbroiler frame.
4)
After cleaning, put the charbroiler frame
back in place.
5)
Line up the slots in the front of the radiant
plate with the front angle. The slots should
fit over the front angle and sit flat on the
charbroiler frame.
6)
Reinstall the charbroiler grate.
WOLF SEALED BURNER RANGETOP OPERATION
Be careful when assembling the compo-
nents. Avoid any contact with the igniter;
it is fragile and can chip or break.
Radiant
Plate
Front
Angle
Charbroiler radiant plate
Charbroiler
Grate
Charbroiler grate
INFRARED CHARBROILER
CHARBROILER OPERATION
I
MPORTANT NOTE:
T
he stainless steel cover
must be removed prior to operation of the
charbroiler.
Turn the knob counterclockwise to HIGH.
P
reheat charbroiler for about 10 minutes
before adding the food. The ceramic tiles
will have an orange-red glow.
To turn the charbroiler off, turn the control
knob clockwise to the OFF position.
Do not use cookware on the charbroiler
grate.