Sub-Zero SRT484CG Range User Manual


 
5
Always check the positions of the
control knobs to make certain the
rangetop and top surface burners
are off when you are finished
cooking.
When deep fat frying, be certain that
the pan is large enough to accom-
modate the desired volume of food
without overflow caused by
bubbling of the fat. Never leave a
deep fat fryer unattended. Avoid
deep fat frying of moist or frost-
covered foods, as foods with high
water content may cause spattering
or spilling of the hot fat. Heat fat
slowly, and stir together any combi-
nations of oils and fats prior to
applying heat. Utilize a deep fat
frying thermometer to avoid heating
the fat to temperatures above the
flash point.
Always light each burner prior to
placing a pan on the burner grate.
Also, turn the control knob to the
OFF position before removing a pan
from the burner grate.
Keep any ventilation filters clean to
avoid grease fires.
TOP SURFACE BURNERS
Have your installer show you where
the gas supply shut-off valve is
located in your home. Learn how
and where to turn off the gas to the
rangetop.
Before performing any service, turn
off the gas supply by closing the gas
shut-off valve and turn off the elec-
tricity.
Keep igniters clean and dry for
proper lighting and performance of
the burners.
Keep appliance area clear and free
from combustible material.
In the event that a burner goes out
and gas escapes, open a window or
a door. Wait at least five minutes
before using the rangetop.
Do not obstruct the flow of air. Your
kitchen must have an adequate
supply of fresh air to ensure proper
combustion and ventilation.
When cooking, set burner controls
so that the flame does not extend
beyond the bottom of the pan.
Always turn pan handles inward so
they do not extend over adjacent
work areas, burners or the edge of
the rangetop.