Filter
Top Products
AUTO CLEAN FUNCTION
1. Never immerse the base, glass jug, power
cord or mains plug into water.
2. Fill the glass bowl with 1200ml of water
with 3 or 4 drops of washing-up liquid.
3. Rinse inside of the bowl using the
cleaning brush, to remove residue
sticking on glass jug.
4. Wash the lid in water with washing up
liquid and rinse it using the cleaning
brush, then cover the glass jug with the
lid.
5. Select auto cleaning function by pressing
the
on control panel.
6. Press Start/Stop key to start the cleaning
process.
7. The appliance will start to blend the
liquid at the beginning of the cleaning
process, and it will heat the water for
up to 2 minutes. Blending will then
commence to help release any food that
may be on the underside of the blades.
8. Once the programme is complete, unplug
the appliance.
9. Lift the glass jug from base housing unit
and place it on flat surface.
10. Remove the lid and finish cleaning the
glass bowl with a sponge, and dry them
thoroughly.
11. Clean the base housing unit with moist
damp soft cloth.
Note: This function will facilitate the cleaning of
the glass jug.
Warning:
1. Do not clean glass jug, interface and base
housing with abrasive side of a sponge or
pad, only use a soft or damp cloth to clean.
2. Do not use any harsh abrasives or strong
household cleaners or any abrasive tools
as these may damage the non-stick coating
surface.
3. Handle the blades inside the glass jug
carefully when cleaning them; they are very
sharp.
4. Do not put the glass jug in the dishwasher.
Care and Cleaning
11