Sunbeam SK6450 Cookware User Manual


  Open as PDF
of 48
 
Using your Ellise
®
Cookware
Before the first use:Ensureallstickersare
removed from the product. Wash in warm
soapy water, rinse thoroughly and dry your
pan and lid.
Note: Werecommend'seasoning'thepan
beforeuse.Lightlyheatthepanonsetting5
for1minuteonly,withoutaddingoil.Turnoff
the heat and remove the probe. Then rub a
smallamountofoilintothecookingsurface
with paper towelling.
1.InserttheControlProbeintotheinleton
thecookware.
2.Plugthecordintoa230-240Vpower
outlet and turn the power on.
3.Pre-heatthecookwaretosetting12-13.
ThensettheControlProbeDialtothe
desired temperature setting. Refer to
page 9 for the temperature guide.
The light on the control probe will illuminate.
This light will remain on until the set
temperature has been reached and then will
cycleonandoffthroughoutcooking,asthe
cookingtemperatureismaintainedbythe
thermostat.
Hint:Oninitialheatingofthecookware,it
is recommended that the temperature be
allowed to cycle (the light glowing on and
off)severaltimes.Thiswillhelpthecooking
surfacetoadjusttoamoreaccuratecooking
temperature.
Note: Thecookwaremustonlybeusedwith
the Control Probe provided.
10
 previous next