Filter
Top Products
25
Model C712 Operating Procedures
081205
Step 17
Slide the pivot pin through the draw handles as the
handles are inserted into the draw valves.
Figure 45
Note: This freezer features three adjustable draw
handles to provide portion control, giving a better
consistent quality to your product and controlling
costs. The draw handle should be adjusted to
provide a flow rate of 5 to 7-1/2 oz. (142 g. to
213 g.) of product by weight per 10 seconds.
To INCREASE the flow rate, tighten the screw. To
DECREASE the flow rate, loosen the screw.
Figure 46
Step 18
Snap the design caps over the bottom of the door
spouts.
Figure 47
Step 19
Slide the two rear drip pans into the holes in the
back panel. Slide the two drip pans into the holes in
the side panels. (See Figure 48.)
Figure 48