TW-357 REV E
22
Table 1.0 Menu System
1. Temperature
1.1 Thermocouple Select
1.2 Calibrate Temperature
1.3 Test Temperature System
2. Level Sensing
2.1 Test Level Sensors
2.2 Set Sensor Offset
2.3 Sensor Positions
2.3.1 Start Set Point
2.3.2 Stop Set Point
2.4 Sensor Type
2.5 Inch/Metric
3. Alarms
3.1 High-Temp Alarm #1
3.2 High-Temp Alarm #2
3.3 System Alarms
3.3.1 LN2 Supply Alarm
3.3.2 Sensor Error Alarm
3.3.3 Remote Alarm Timer
3.3.4 Lid Open Too Long
3.3.5 Thermocouple Alarm
3.4 Test Alarms
3.4.1 Test Audible
3.4.2 Test Visual
3.4.3 Test Remote
4. Logging
4.1 Dump Logs
4.1.1 Dump System Logs
4.1.2 Dump Error Logs
4.1.3 Dump Temp Log #1
4.1.4 Dump Temp Log #2
4.2 Error Logs
4.2.1 Sensor Error Logging
4.2.2 Low Supply Logging
4.2.3 Remote Alarm Logging
4.2.4OpenThermocouple logging
4.2.5 High Temperature
Alarm Logging #1
4.2.6 High Temperature
Alarm Logging #2
4.3 System Logs
4.3.1 Fill Logging
4.3.2 Lid Action
Logging
4.3.3 User Access Logs
4.4 Temperature Logs
4.4.1 Thermocouple #1 Log Rate
4.4.2 Thermocouple #2 Log Rate
4.5 Erase Logs
4.5.1 Erase System Logs
4.5.2 Erase Error Logs
4.5.3 Erase Temperature Log #1
4.5.4 Erase Temperature Log #2
5. Security
5.1 Power-On Password
5.2 Menu Password
6. User Options
6.1 RS-232 Settings
6.1.1 Disable RS-232
6.1.2 Set up RS-232
6.1.2.1Toggle
Handshaking
6.1.2.2 19200 Baud (Sets
the baud rate)
6.2 Control Options
6.2.1 Date & Time
6.2.2 Lid/Defog Settings
6.2.2.1 Defog Timer
6.2.2.2 Lid Switch Setup
6.2.2.3 Auto Defog
6.2.2.4 Quick-Chill
6.2.3 Control By Temperature
6.2.3.1Disable
Temperature
Control
6.2.3.2Temperature
Control settings
6.2.3.2.1Control
Temperature
6.2.3.2.2 Control
Range
6.2.4 Freeze-Guard Options
6.2.4.1 Valve Open
Duration
6.2.4.2 Frozen Valve
Sensor
6.2.4.3 Valve De-icing
6.3 Display Brightness
6.4 About this Control