Thermador HS-HST-HSB Ventilation Hood User Manual


 
Page 2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: FOR GENERAL VENTI-
LATING USE ONLY. DO NOT USE
TO EXHAUST HAZARDOUS OR
EXPLOSIVE MATERIALS OR VA-
PORS.
WARNING - TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
A. Use this unit only in the manner
intended by the manufacturer.
If you have questions, contact
the manufacturer (Thermador
Customer Service at 800/
735.4328).
B. Before servicing or cleaning the
unit, switch power off at service
panel and lock service panel
disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be
locked, securely fasten a
prominent warning device,
such as a tag, to the service
panel.
C. Installation Work and Electri-
cal Wiring Must Be Done By
Qualified Person(s) In Accor-
dance With All Applicable Codes
& Standards, Including Fire-
rated Construction.
D. Sufficient air is needed for
proper combustion and ex-
hausting of gases through the
flue (chimney) of fuel burning
equipment to prevent back-
drafting. Follow the heating
equipment manufacturers
guideline and safety standards
such as those published by the
National Fire Protection Asso-
ciation (NFPA), the American
Society for Heating, Refrigera-
tion and Air Conditioning Engi-
neers (ASHRAE), and the local
code authorities.
E. When cutting or drilling into
wall or ceiling, do not damage
electrical wiring and other
hidden utilities.
F. Ducted systems must always be
vented to the outdoors.
CAUTION: To reduce risk of fire
and to properly exhaust air, be
sure to duct air outside - do not
vent exhaust air into spaces
within walls, ceilings, attics, crawl
spaces, or garages.
WARNING - TO REDUCE THE RISK
OF FIRE, USE ONLY METAL DUCT
WORK.
Install this hood in accordance with
all requirements specified.
WARNING - To Reduce The Risk
Of Fire Or Electric Shock, Do Not
Use This Hood With Any External
Control Device.
CAUTION: To Reduce The Risk Of
Fire And Electric Shock, Install
This Rangehood Only With Blower
Models specified.