THE FOODSAVER USER MANUAL
21
6 Lock the lid by pulling the locks
forward on both sides until they
snap into place. (You may need to
press down lightly on the stars
while pulling the locks forward.)
7 Press and release the On button.
The lights will turn on in sequence
as the Vac 1050 starts the vacuum
cycle and air is removed from the
container. The sound will stop and
the lights will turn off when
vacuum packaging is complete.
8 Turn the knob on the universal lid so the arrow points to “Closed.”
9 Vacuum packaging is complete.
How to Open the FoodSaver Universal Lid
To open the FoodSaver Universal Lid, turn the knob so the arrow
points to “Open.” You should now be able to remove the univer-
sal lid from the container.
IMPORTANT: Remember to remove the accessory hose from the
accessory port on the FoodSaver Vac 1050 before you vacuum
package in FoodSaver Bags.
How To Vacuum Package Using FoodSaver Universal Lids
THE FOODSAVER USER MANUAL
20
FoodSaver Universal Lids give you the flexibility of vacuum
packaging some foods in their original containers. They work on
most metal cans and glass jars. They’re excellent for retaining the
freshness of tomato and pasta sauces, coffee, mustards, and toppings.
However, vacuum packaged canned foods still must be refrigerated
to minimize micro-organism growth. If you are planning to store
canned foods for more than a day, transferring foods from the can
into a FoodSaver Bag, FoodSaver Canister, a glass, or a hard plastic
container is recommended to prevent “off-flavor” from developing
from the can.
1 Place the Vac 1050 on a flat, dry surface
and plug the power cord into a standard
electrical outlet.
2 The universal lid is labeled “Open,”
“Vacuum,” and “Closed.” Turn the knob
on the universal lid so the arrow points to
“Vacuum.”
3 Place the universal lid on top of
the open container.
4 Insert one end of the accessory
hose into the accessory port
on the Vac 1050.
5 Insert the other end of the
accessory hose into the
hole on the top of the
universal lid.
CAUTION: FoodSaver Universal Lids are not to be used with thin
glass, crystal, plastic, or aluminum containers. The vacuum
force exerted by the Vac 1050 is very powerful and could implode
a thin glass or a non-rigid container.