Filter
Top Products
THE FOODSAVER USER MANUAL
23
How to Vacuum Package Using FoodSaver Bottle Stoppers
THE FOODSAVER USER MANUAL
22
5 Lock the lid by pulling the locks
forward on both sides until they
snap into place. (You may need to
press down lightly on the stars
while pulling the locks forward.)
6 Press and release the On button.
The lights will turn on in sequence
as the Vac 1050 starts the vacuum
cycle and air is removed from the
bottle. The sound will stop and the
lights will turn off when vacuum
packaging is complete.
7 Remove the accessory hose from the bottle stopper.
8 Vacuum packaging is complete.
How to Remove the FoodSaver Bottle Stopper
To remove the FoodSaver Bottle Stopper, simply twist and pull
up on the bottle stopper to release the vacuum.
IMPORTANT: Remember to remove the accessory hose from the
accessory port on the Vac 1050 before you vacuum package in
FoodSaver Bags.
FoodSaver Bottle Stoppers are the best way to keep wine, oils, and
non-carbonated bottled liquids fresh longer. You will keep their
delicate taste from going stale by not exposing the liquids to air.
FoodSaver Bottle Stoppers are not to be used with plastic bottles.
Also, do not use with any carbonated or sparkling beverages.
Carbonation happens under pressure. A vacuum removes this
pressure, releasing the bubbles and causing the beverages to
become flat.
1 Place the Vac 1050 on a flat, dry surface and plug the power cord
into a standard electrical outlet.
2 Insert the bottle stopper into the neck of the bottle. Leave at
least one inch between the contents and the bottom of the
bottle stopper.
3 Insert one end of the acces-
sory hose into the accessory
port on the Vac 1050.
4 Insert the other end of the
accessory hose into the hole on
the top of the bottle stopper.