4
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
CAUTION: NEVER PLACE BLENDER MOTOR BASE OF APPLIANCE IN
WATER OR OTHER LIQUIDS.
2. Place blender motor base on a dry level surface.
3. Make sure the knob is turned to OFF position, see FIGURE 1.
4. I n v e rt container onto level countertop and assemble cutting assembly
onto bottom of the container, making sure they are securely
tightened into place, see FIGURE 2. Insert container until it fits
securely into the blender motor base, aligning the notches and
grooves. Turn clockwise to lock.
5. Place food into container and cover with the lid assembly. Always
hold onto container while blending. See DO and DO NOT
instructions before using.
CAUTION: DO NOT ATTEMPT TO OPERATE WITHOUT LOCKING RING,
BLADES, GASKET, CONTAINER, LID, AND LID INSERT PROPERLY IN
PLACE.
6. Plug unit into 120 V ~ 60 Hz AC outlet.
7. To start the blender, turn the speed control knob clockwise to any
speed (1-7).
NOTE: To use the “PULSE” action, press the pulse button for a few
seconds. Release and repeat as necessary. The “PULSE” may be
used for such food items as crumbling crackers, grating cheese or
chopping vegetables.
8. Tu rn knob to OFF position to stop action. Wait until blades stop
ro t a t i n g before removing lid.
9. Unplug the appliance before removing container.
10. Grasp container handle, turn counter-clockwise and lift off of
blender motor base. Remove lid assembly. Pour processed food
out of the container. Unscrew locking ring from container and
carefully remove cutting unit assembly.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
CARE AND CLEANING
1. Unplug the appliance.
2. Grasp container handle, turn counter-clockwise and lift off of
blender motor base. Remove lid assembly and pour processed
food out of container. Unscrew locking ring from container and
carefully remove cutting assembly.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
CAUTION: NEVER PLACE BLENDER MOTOR BASE OR APPLIANCE IN
WATER OR OTHER LIQUIDS.
3. Immediately after each use, disassemble lid and cutting assembly.
Carefully wash all parts in warm sudsy water. Rinse and dry
thoroughly. Do not wash parts in dishwasher.
4. Do not use a harsh abrasive on any part of the blender.
5 . Clean exterior of blender motor base with a soft damp cloth and dry.
TB8 BLENDER 3/7/01 3:32 PM Page 4