Toastmaster tbr15 Bread Maker User Manual


 
18.
Bread Maker Use and Care Guide
Bread Recipes
We suggest starting your bread baking with this White Bread recipe. Follow each step carefully. These
steps have been written to eliminate the most common errors in bread maker baking and may be
helpful for any recipe.
White Bread
1.0 lb. loaf 1.5 lb. loaf
Water 80°F/27°C
3
4 cup 1 cup
Oil 4 tsp 2 TBL
Sugar 4 tsp 2 TBL
Salt 1 tsp 1
1
2 tsp
Bread Flour 2
1
4 cups 3 cups
RED STAR
®
Active Dry Yeast 1
1
2 tsp 2
1
4 tsp
or
RED STAR
®
QUICK•RISE
Yeast 1 tsp 1
1
2 tsp
or
Bread Machine Yeast 1 tsp 1
1
2 tsp
Program: BASIC
1. Remove the bread pan from the bread maker. Attach the kneading blade onto the shaft. Make
sure all ingredients, except water, are at room temperature.
2. Use a liquid measuring cup to measure the water (80°F/27°C/baby bottle temperature) and pour
into the bread pan.
3. Use a measuring spoon to measure the oil and add to the bread pan.
4. Use a measuring spoon to measure the sugar and salt; level off with the straight edge of a knife
and add to the bread pan.
5. Lightly spoon bread flour into a dry measuring cup; level off with the straight edge of a knife and
add to the bread pan. Smooth into all corners. Lightly tap pan on counter 3 times to settle all dry
ingredients.
6. Carefully measure yeast with a measuring spoon; level off with the straight edge of a knife and
add to the bread pan. If using delay timer, make sure yeast is on top of bread flour, away from
liquids.
7. Place the bread pan into the bread maker. Push down on rim until it snaps into place. Close the
lid.
8. Select PROGRAM and CRUST COLOR and set TIMER to delay, or press START for immediate
start.
9. At the beep during the kneading process, check the dough ball. It should be slightly tacky to the
touch. Add more water or flour if necessary; see Dough Ball. At this time, push down any dough
or flour that may be on the sides of the pan.
10. When the beeper sounds, the bread has finished baking and the keep warm cycle will start. The
display window will show 0:00, and the colon will flash.
11. Press Stop and use oven mitts to carefully remove the bread pan at any time during the keep
warm process.
CAUTION: THE OVEN CAVITY, BREAD PAN, KNEADING BLADE AND BREAD WILL BE VERY
HOT. USE OVEN MITTS.
12. Turn bread pan upside down and shake several times to release the bread. Do not use metal
utensils inside the bread pan or machine. Remove the kneading blade and allow loaf to cool
standing upright on wire rack approximately 20-30 minutes before cutting.
TBR15&CAN_IB_4-11-03(New) 11/4/03 3:45 PM Page 18