Filter
Top Products
13.12.
Lightwave Oven Use and Care Guide
Top Brown Instructions
To top brown foods, follow the toasting instructions above but place the
food on the Bake Pan on the Wire Rack.
Hints For Top Brown
◆
Watch food to avoid over-browning.
◆
You may brown the top of bagels (cut side up), English muffins or
melt cheese on sandwiches or casseroles.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Contact a qualified
appliance repair technician if the product requires servicing.
Cleaning and Storing
ALWAYS UNPLUG THE UNIT AND ALLOW TO COOL
COMPLETELY BEFORE CLEANING.
Clean-Up Of The Interior
1. Unplug oven and allow to cool before cleaning.
2. Remove all accessories from inside the oven cavity: Bake/Broil
Pan, Broil Insert, Wire Rack and Crumb Tray.
3. Clean interior with a mild or non-abrasive cleaner and plastic
scouring pad after each use to avoid build-up. Do not rub too hard
as the surface on the walls of the
Lightwave Oven
may become
scratched.
4. Rinse and dry thoroughly before closing Glass Door.
CAUTION: DO NOT use spray-on or other oven cleaners. Using
these types of cleaners may cause electrical damage.
Toast Function
1. Plug unit into a 120 V outlet. Open the Glass Door. Place Wire Rack
into Shelf Position #3. Place Bread on Wire Rack. Close the Glass
Door. The Operation Light and Display Window will illuminate
while the Unit is plugged in.
2. Press the Function Button until the arrow is pointing toward the
Toast Function. The default setting of medium (Med.) toast color
will appear in the Display Window under Color.
3. To change the toast color, turn the Time/Toast Color Dial until the
arrow is pointing to the desired color of toast Light, Med. or Dark.
4. Press the Start/Stop button. The display will flash (-- --) in the Timer
section and the Lightwave Oven will begin the toasting process.
NOTE: The average time will range from 2-5 minutes, depending on the
color chosen. Consecutive toasting times will be less, due to the
Lightwave Oven cavity already being heated. Adjust the Color Control
down one shade to toast the same color.
5. Condensation may build-up on the inside of the Glass Door, but will
evaporate during toasting.
6. The Lightwave Oven will beep when the Toast function is complete.
7. Open Glass Door. Using oven mitts, carefully remove Wire Rack.
Close Glass Door.
8. Unplug oven and allow to cool completely before cleaning.
See User Maintenance Instructions. Unplug when not in use.
NOTE: To change the toast color during the toasting process, you
must start the programming sequence over. Press and hold the Stop
button until the unit beeps. The current selected Toast setting will
appear in the Display Window. Select the desired toast color and
press the Start button to resume the toasting process.
Hints For Toast
◆
Follow toaster food directions.
◆
Frozen and heavy breads require a darker setting (i.e. bagels and
English muffins).
◆
Using oven mitts, remove Crumb Tray and empty after each use.