Filter
Top Products
17.
Dehydration Function
Programming Pizza
(Cont.)
5. Press the Start button. The Operation Light will come on and the
Convection Toaster Oven-Broiler will begin the pizza cycle. The letter
“P” will flash in the Display Window and the fan will come on. Once the
Convection Toaster Oven-Broiler determines the time necessary to cook
the pizza, the letter “P” will change to minutes and seconds and the
Timer will begin to count down.
6. The Convection Toaster Oven-Broiler will beep and the Operation
Light will flash continuously when the Pizza function is completed. Open
the Glass Door and press the Stop button.
7. Using oven mitts, carefully remove Pizza Pan and/or Wire Rack with
pizza. Close the Glass Door. Press Stop again to return to the Clock
function.
8. Unplug Oven and allow it to cool completely before cleaning.
See User Maintenance Instructions. Unplug when not in use.
Note: To change the pizza size or crust color selection during the cooking
process, you must start the programming sequence over. Press the Stop
button. The current selected pizza size and crust color will appear in the
Display Window. Select the desired pizza size and crust color and press the
Start button to resume the cooking process.
Dehydration Racks are required when using this function. They are not
included with this oven but may be purchased separately. Please see separate
order form, or contact our Consumer Relations Department by calling the
number on the back of this Use and Care Guide and ask for part number
TOV211DEH. Instructions are included with the Dehydration Racks.
TOV211CAN_IB_18-11-04 11/19/04 5:54 PM Page 17