Filter
Top Products
5
PREHEAT
Preset function is set at 4:00 minutes and can not be adjusted. Always
preheat the UltraVection™ Oven for the first use except where indicated.
When cooking consecutive batches of food it is not necessary to preheat
after the first batch.
During PREHEAT, P will appear on the display.
TURBO is the basic cooking function. Food is rapidly seared, sealing in
moisture and flavor. It is preset at 5:30 (5 minutes and 30 seconds) and can
be adjusted from 10 seconds to 16 minutes. During use, the TURBO func-
tion light will be on. The cooking time will count down on the display.
CRISP is the finishing touch after cooking with TURBO. It adds a deep fried
texture, color and crunch to French fries, tater tots, onion rings and many
other foods. It is preset at :30 seconds and can be adjusted from
10 seconds to 6 minutes. During use, the CRISP function light will be on. The
cooking time will count down on the display.
BROWN is the function for additional browning of the food. Preset function
is :30 seconds and can be adjusted from 10 seconds to 5 minutes. During
use, the BROWN function light will be on. The cooking time will count down
on the display.
FROZEN PIZZA
This is a preset combination of TURBO, CRISP AND BROWN functions. It is
a total of 8:00 minutes and can not be adjusted. Place frozen pizza into
preheated oven, press the FROZEN PIZZA button and the oven will start
automatically. The cooking time will count down on the display. Note: Since
frozen pizza toppings vary, so do their cooking times. It is a good idea to
check pizza for doneness one minute from end of the auto pizza cycle.
START
Press START to start the oven once the cooking function(s) has been selected:
TURBO, CRISP and/or BROWN.
LIGHT
To turn the interior oven light on, simply push the LIGHT button. It will
remain on for approximately five minutes before going off or may be
turned off by pressing the LIGHT button again. To replace the bulb see Bulb
Replacement.
STOP
Press and hold to stop operation of the oven. Press again to cancel a
function.
CLOCK SET
Use this button to set time as described on page 6.